Design benefits
-
Compatibility
Compatible with approved roof bars
-
Easy assembly / dismantling
Pitch and dismantle in less than 5 minutes
-
Easy transport
Dimensions of the cover: 146 x 123 x 35 cm Weight: tent 48.5 kg + ladder 7 kg
-
Capacity
Bedroom (W) 140 x (L) 240 x (H) 106cmMattress 139 x 237 x 5 cm density 26kg/m3
-
Waterproof
Water column (Schmerber): Flysheet > 2,000 mm.
-
Heat reduction
Flysheet, mechanical air vents, Fresh & Black fabric for a good night's sleep.
-
Wind resistance
Resistance to wind speeds up to 60 km/h: validated in wind tunnel
Design details
Roof bar compatibility
Compatible with approved roof bars for a load greater than 75 kg (dynamic weight).
The usable width is 78 cm, the distance between the roof and the top of the roof bar must be greater than 7.5 cm and the width of the roof bar tube must be less than 9.5 cm (see the diagrams in the product sheet photos).
Check that your roof bars and tent are properly fastened each time you use it.
It’s not compatible with longitudinal roof bars.
What are dynamic and static loads?
This tent needs a 75 kg load capacity, a so-called "dynamic" load, i.e. when the vehicle is moving. When the vehicle is stationary, the maximum static load capacity is much higher.
Don't worry, once installed and stationary, your roof bars will be able to support the roof tent, as well as the weight of the people inside (200 kg in total).
Pitching/striking
Watch the pitching tutorial video and/or read the instructions in the product bag carefully.
Remove the cover and unclip the two side buckles.
Grab the ladder and use it to tilt the tent.
Adjust the ladder so that the tent is flat, and properly secure the bars, so that they are locked in place before you can stand on them.
To dismantle, use the ladder to fold up the tent, close the side buckles and put the cover back on.
Product contains:
- 1 tent (bedroom + fly sheet)
- 1 waterproof cover
- 1 integrated foam mattress
- 1 aluminium ladder measuring 2.5 m max. when unfolded
- 1 screw kit (4 plates + screws and washers)
- 1 shoe pocket
- 1 attachment strap for accessories (located in the shoe pocket)
AFTER-SALES SERVICE: Don't throw away, repair !
As designers and users who love our playing field, we care about the resistance of our products, that’s why all our tents are designed to be repairable.
You will find the following parts for this tent in after-sales service:
- cover
- mattress cover
- flysheet
- bedroom
- screw kit
Find all the information on our support website
Restrictions on use & safety 1/2
Caution: NEVER GET INTO THE TENT IF THE LADDER BARS ARE NOT LOCKED IN PLACE.
FALL HAZARD. (see instructions)
Do not use the ladder for anything other than its intended purpose.
Restrictions on use & safety 2/2
Do not drive with the tent up.
Do not drive if the edge of the cover is not inside the front rail.
Do not use any accessories other than those supplied with the tent.
Always set up the tent on a level surface so that it is stable.
Do not install on vehicles with a sunroof.
Do not pitch the tent facing the wind.
Keep the instructions accessible.
Kommentar