Design benefits
-
Easy dressing
One-piece ping suit with back zip, stretch under arms.
-
Thermal insulation
5 mm full neoprene ping suit. Waterproof seams (GBS), smooth sleeve cuffs.
-
Freedom of movement
Stretch neoprene and no stitching under the arms
-
Robustness
Printed reinforcements to reduce wear on the knees, lower back and shoulders.
Design details
Details of thermal insulation
Neoprene 5 mm one-piece wet-type with back zip.
Seams taped using a GBS (glued and blind-stitched) assembly.
Once a thin layer of water (that enters through the zip) gets trapped between your body and the ping suit, the water stays warm as it is not replaced.
This thin layer of water keeps you warm.
Rolled, smooth edged cuffs, ankles and neck for maximum watertightness.
Construction of the zip and assembly of the ping suit
The back zip is designed so that two panels of smooth neoprene overlap to limit the inflow of water.
The ping suit's GBS assembly (Glued and Blind-Stitched) means that the seams are waterproof: the neoprene is glued and then stitched for extra durability (the needle does not go all the way through the neoprene to stop water getting through).
Snap hook on the upper thigh to attach accessories.
Freedom of movement / Easy to put on
One-piece with separate hood (not included). Stretch neoprene under the arms and extremity panels (very soft and stretchy neoprene) to adapt to fit different body shapes and suit various physiques.
The extremities of the legs and arms are also made of stretch neoprene for easier dressing.
No underarm seams for easier arm movements.
Reduced wear
The ping suit has printed reinforcements on the knees.
There are also prints on the friction zones linked to the buoyancy compensator (shoulders and lower back).
Also provides better body support and prevents the vest from slipping on the slides.
Wrist protection to prevent the pe computer from turning.
Thermal performance class
This scuba ping suit provides thermal protection that has been tested by the independent INPP institute (Marseilles, France) in order to validate its compliance with the current standard (EN 14225-1:2017).
CLASS C certified ping suit:
A (+7°C/+12°C / +45°F/+54°F)
B (+10°C/+18°C / +50°F/+64°F)
C (+16°C/+24°C / +61°F/+75°F)
D (+22°C/+30°C / +72°F/+86°F).
Adjust the thickness, adjust your warmth!
When ping, cold is your worst enemy! Using the right thermal protection based on the water temperature, is essential. This concept was created to keep you from having to purchase different ping suits for different ping conditions, with 5 pieces that can be combined with your suit depending on the temperature.
In this way, you can complete your thermal insulation with a hood, a neoprene top, a top with a hood, a 1 mm under-shorty or a 5.5 mm over-shorty.
What is a ping suit?
This is the most common type of ping suit on the market. It is not designed to keep the water out, but to trap it, so that your body then warms it up, creating a thermal buffer between you and the outside. Made of neoprene - a rubber polymer filled with air bubbles - these ping suits are available in thicknesses of 0.5 mm to 7 mm. Thanks to their suppleness and modularity, they constitute excellent ping suits.
Tips on how to get into a ping suit
Put your foot in a plastic bag, then slip your leg into your ping suit. Your entire foot comes out without snagging! To adjust, ask someone to blow into your sleeve from the wrist. The incoming air inflates the interior of the neoprene ping suit, immediately separating it from your skin. You can then easily proceed with the final adjustments.
Tips on how to take care of your ping suit
1) Soak the inside and the outside of the ping suit in clean water after each session.
2) Clean with a bactericide solution.
3) Rinse thoroughly in clean water.
4) Dry on a wide hanger in a dark and well-ventilated place. Caution: the sun will cause the colours of the textile parts of the ping suit to fade and speeds up the ageing process of the neoprene. Zips can be cleaned with a toothbrush and lubricated with silicone grease.
Kommentar